RB750 / 750G - Setup for UniFi "


Thanks to LYN member Oreomambo for advising how to setup this device for UniFi !
Also thanks to Soliton SG's technical staff Neb for his remote support !
Initial setup was posted here.

Notes:

  • This 2-in-1 device has vlan tagging (500 for Internet & 600 for IPTV) and router functions, it does not have wifi
  • This device has lots of advance features and functions (honestly I still not fully understand all yet!), advance user will appreciate and like this device
  • User may need to setup a wifi router
  • Since I'm not technical enough to use codes to program the device, I personally prefer to use the WinBox (window base) to configure the unit
  • You may download the WinBox here or  visit http://www.mikrotik.com/download.html and select "Winbox configuration tool" under "Tools / Utilities" section to download
  • Default IP is 192.168.88.1 user ID is "admin"  with blank password
  • You need to set your PC/laptop with static IP 192.168.88.x  subnet 255.255.255.0 to access the device
  • This setup for UniFi is just basic to connect internet & IPTV only, you may need to refer the following links for further setup on:


Setup for UniFi:


Hard reset the unit first!

Go to MikroTik download section, download the latest WinBox Tool to your computer

Connect your computer to either Port 2/3/4 of the RB750/750G

Then run the WinBox.exe
Click the radio button to search & select the RB750/750G device
Enter default login: admin  with  blank password
Click "Connect"
Go to "Interfaces" select "VLAN" tab, add the following vlan 500 & 600, click "OK" when done
Select "Ethernet" tab, select "ether5" and setup "Master Port" as none, click "OK" when done
Go to "Bridge" and select "Bridge" tab, create a bridge called "UniFi-IPTV", click "OK" when done
Click on "Ports" tab, create 2 ports as follow for IPTV, click "OK" when done
Go to "PPP" and select "Interface" tab, add and choose "PPPoE Client"
Enter the following at "General" tab
Enter your UniFi user ID & password at "Dial Out" tab, click "OK" when done
Go to "IP --> Firewall"

Click on "NAT" tab, add/change the NAT as follow, click "OK" when done
23Apr2011 Update - Thanks Rizvanrp for highlighting the Out-Interface setting in order for the port forward to work properly! Smile
Go to "IP --> DHCP Server"
Select "Network" tab, enter Google DNS (or your preferred DNS) as follows, click "OK" when done
Can also consider OpenDNS = 208.67.222.222  &  208.67.220.220
Go to "IP --> DNS"
Enter Google DNS (or your preferred DNS) at "Settings" tab, click "OK" when done
Can also consider OpenDNS = 208.67.222.222  &  208.67.220.220
Setup completed, connect cables per following connection diagram.
System connected!



Connection:

BTU[Port1] --> [Port1]RB750/750G[Port2/3/4] --> <computer / laptop/ wifi AP>
BTU[Port5] --> [LAN]Set-Top-Box IPTV

    Comments

    Post a Comment

    Popular posts from this blog

    DMASOFTLAB RADIUS MANAGER BILLING SYSTEM v 4.1 Finally Released

    Image
    DMASOFTLAB RADIUS MANAGER BILLING SYSTEM v 4.1 Finally Released  Filed under: Radius Manager — Tags: dmasoftlab radius manager new version , radius manager 4.1 — Waseem Anjum Meo @ 10:47 AM             5 Votes Finally DMA has released its new version for Radius Manager Billing System. Complete info can be found here. http://www.dmasoftlab.com/cont/revision   *** v 4.1.0 *** 2013-10-23 *** NEW FEATURES: ↓ -enhanced SMTP mailer with authentication and freely configurable port -SMS alert indicating the account is going to expire ** This was most DEMANDED   , Jz -support for BulkSMS HTTP->SMS gateway ** This was most DEMANDED   , Jz -alert type is selectable in user preferences (ACP / UCP) ** This was most DEMANDED   , Jz -enable traffic report per user in ACP even if global traffic report is disabled -service change is allowed for Hotspot MAC accounts -auto logout expi...
    Read more

    How To Configure Nano Station M2 As Access point

    Image
    Web Configuration Now that the hardware has been completely installed, it's time to configure the Bullet to act as a WiFi Access Point. Configuration is performed using your web browser by typing in  https://192.168.1.20 . You'll get a warning pop up stating that the device has presented an invalid SSL certificate due to the certificate being self-signed and not issued by a CA. This is normal so just hit accept/continue. You'll then need to log in with the default username and password of "ubnt". Configure the Wireless tab The first step is to configure the Wireless tab so the Bullet acts as a WiFi Access Point. Change the settings according to the below picture. Be sure to set the device up with WPA2 security and an appropriate WiFi password here. You can also use this tab to adjust the power output should you wish to cover a smaller area. The default channel bandwidth is 40MHz, but some older devices such as wireless printers and mobile phones cannot o...
    Read more