Skip to main content

Buffalo WZR-HP-G450N


Please connect an Ethernet cable from your existing router/network in to the port labelled "Internet" on the back of the Buffalo.

Then connect an Ethernet cable between port 1 on the back of the Buffalo and your computer

    Buffalo WHR-HP-G300N with wires

    Turn on the router and wait for a few minutes

    Open a web browser and type http://192.168.10.1 in to the address bar

    Buffalo WHR-HP-G300N: login

    You will be prompted to log-in. The default username is "admin" and the password is "admin" (unless you have changed these).

    Click on "Administration" on the left menu

    Buffalo WHR-HP-G300N: Select Administration

    Click on "Firmware Upgrade" on the left menu

    Click "Browse" and select the firmware file that you have been provided

    Be sure to set the "After flashing, reset to" option to "Reset to Default Settings"

    Click on "Upgrade".

    The upgrade process will now begin and take up to 5 minutes to complete, and reboot

    Buffalo WHR-HP-G300N: upgrading firmware

    Buffalo WHR-HP-G300N: rebooting firmware

    Comments

    Post a Comment

    Popular posts from this blog

    How to Install Windows 7 {Beginners}

    Image
    Are you installing Windows 7..? You don't need to be a professional or refer to a confusing manual in order to do so. Just follow this guide, and you'll have Windows 7 installed on that computer in no time... rt 1 Installing Using a Windows installation DVD Clean Install A clean install is intended for users who want to freshly install Windows on their computer (by deleting all of the data on the hard disk and then installing Windows) or computers that do not have an operating system yet. 1 Enter your computer's BIOS.  Turn off the computer on which you want to install Windows 7 and then turn it back on. When the BIOS screen appears or you are prompted to do so, press  Del ,  Esc ,  F2 ,  F10 , or  F9  (depending on your computer’s motherboard) to enter the system BIOS. The key to enter the BIOS is usually shown on the screen. 2 Find your BIOS's boot options menu.  The boot options menu of your BIOS may vary in locat...
    Read more

    Install and Tuning Squid Proxy Server for Windows........

    Image
    The earlier discussion on the basic of bandwidth management that only uses masquerading on firewall nat to share the internet connection to each client for our network. And then we classify into the various kinds of  connection packets  and give different priorities to them. It depends on how much you want to classify and get your desired priority. One step further more about bandwidth management, using proxy server on the network is going to be very dramatic role in obtaining the satisfaction of our clients in use of the internet connection. Actually, the browser itself has been using this method, but the ability is still limited by making the cache inside. The static data from any sites that have been accessed, the browser will make the cache that stored inside, so if sometimes we access it again the static data from the sites is not requested again except the dynamic data, the result is the loading of the site will be faster compared with the first time ...
    Read more