MikroTik Graphing

Besides the possibility to view the consumed resources in real-time, the MikroTik equipments allow viewing statistics for a period of up to one year. In this tutorial you will learn how to activate he collecting of statistic informations.
Notă: This tutorial assumes that the previous tutorial have been completed.

1. Accessing the MikroTik router (WebFig)

  • Login in browser at the adress http://192.168.88.1/ with admin user and the proper password.

2. Activating and accessing the MikroTik graphs system

    • The RouterOs operating system of the MikroTik equipments allows the activation of statistics for the interfaces traffic, queues (limitation) of bandwidth and hardware resources.
    • The access at stored graphs can be secured only for the users of the network based on IP addresses.
    • Pentru activarea graficelor de trafic pe intefețe urmează pașii din imaginile următoare.
Graphs of MikroTik interfaces
Adding graphs of MikroTik interfaces
    • For activating the graphs of bandwidth limitations follow the steps from the next images.
Grafice limitări MikroTik
Adding graphs of RouterOS limitations
    • For activating the graphs of hardware resources follow the steps from the next images.
Graphs of RouterOS resources
Adding graphs of MikroTik resources
    • After a period of at leat 5 minutes, the graphs will begin to be created on the router.
    • The graphs can be viewed by accessing the login page of the MikroTik router, from the menu Graphs.
Accessing the MikroTik graphs
MikroTik graphs
MikroTik interface statistics

Comments

Post a Comment

Popular posts from this blog

DMASOFTLAB RADIUS MANAGER BILLING SYSTEM v 4.1 Finally Released

Image
DMASOFTLAB RADIUS MANAGER BILLING SYSTEM v 4.1 Finally Released  Filed under: Radius Manager — Tags: dmasoftlab radius manager new version , radius manager 4.1 — Waseem Anjum Meo @ 10:47 AM             5 Votes Finally DMA has released its new version for Radius Manager Billing System. Complete info can be found here. http://www.dmasoftlab.com/cont/revision   *** v 4.1.0 *** 2013-10-23 *** NEW FEATURES: ↓ -enhanced SMTP mailer with authentication and freely configurable port -SMS alert indicating the account is going to expire ** This was most DEMANDED   , Jz -support for BulkSMS HTTP->SMS gateway ** This was most DEMANDED   , Jz -alert type is selectable in user preferences (ACP / UCP) ** This was most DEMANDED   , Jz -enable traffic report per user in ACP even if global traffic report is disabled -service change is allowed for Hotspot MAC accounts -auto logout expired ACP sessions -FreeRadius 2.2.0 support -DOCSIS u
Read more

How To Configure Nano Station M2 As Access point

Image
Web Configuration Now that the hardware has been completely installed, it's time to configure the Bullet to act as a WiFi Access Point. Configuration is performed using your web browser by typing in  https://192.168.1.20 . You'll get a warning pop up stating that the device has presented an invalid SSL certificate due to the certificate being self-signed and not issued by a CA. This is normal so just hit accept/continue. You'll then need to log in with the default username and password of "ubnt". Configure the Wireless tab The first step is to configure the Wireless tab so the Bullet acts as a WiFi Access Point. Change the settings according to the below picture. Be sure to set the device up with WPA2 security and an appropriate WiFi password here. You can also use this tab to adjust the power output should you wish to cover a smaller area. The default channel bandwidth is 40MHz, but some older devices such as wireless printers and mobile phones cannot o
Read more